1. Spread the cloth diaper and lay the baby down on it. The soaker pad is sewn together with the cloth diaper.

2. Pull the soaker up.

3. Pull the front of the diaper until it reaches the baby’s front waistline.

4. Snap the side of the diaper around the baby. Adjust the tabs to make them comfortable for the baby. Do the same for the tabs on the other side.

5. Adjust until the baby is comfortable.

1. Slide the insert into the pocket opening on the upper of the pocket cloth diaper.

2. Pull the absorbent insert all the way into the pocket. Make sure the insert reaches all the way to the end of the pocket.

3. Spread the cloth diaper and lay the baby down onto the cloth diaper.

4. Pull the front of the diaper until it reaches the baby’s front waistline.

5. Snap the side of the diaper around the baby. Adjust the tabs to make them comfortable for the baby. Do the same for the tabs on the other side.

6. Adjust until the baby is comfortable.

1. Fitted diapers can be fit and adjusted to your child’s shape. They are easy to use as they are closed with snaps.

2. Lay the baby on top of the open fitted diaper. Snap the side of the diaper to the front. Adjust until the baby is comfortable.

3. Pull the front of the cover, and snap the side of the diaper around the baby. Adjust the tabs until the baby is comfortable.

1. Spread the diaper flat.

2. Fold one section over at the seam, into the center of the diaper flat.

3. Then fold the other side on top of the first fold.

4. Lay the diaper flat inside a cover, as shown or place it inside a pocket diaper to use.

5. Pull the flat up, and cover the baby until it reaches the baby’s front waistline.

6. Pull the front of the cover, snap the side of the diaper around the baby. Adjust the tabs until the baby is comfortable.